Handsaw honey hole: 6 saws and a miter box


In the words of the baseball great Sammy Sosa, “Garage sales have been very, very, good to me.” Or at least that’s what I’d think he’d say if his run of saw luck was as good as mine.

The Craig’s List garage sale ad touted “vintage/antique handsaw collection – make offer for one or all,” sandwiched between the Singer sowing machines and the 1960’s Life Magazines. The words “collection” and “make offer” motivated me to deplete two gallons of gas journeying to/from the southern hinterlands of my fair city. I had to see this marvel for myself.

The seller was an early bird and had already been open for business for a couple of hours when I drove up. So I braced myself to sort through a lot of late-model Disstons missing saw nuts or early model whatevers complete with nasty-assed kinks, rust, quirky filings and jiggered handles along with said wanting for saw nuts.

I sauntered, (if by “sauntered” you take it to mean ‘walked as fast as I could without tipping my eagerness to the seller’, then you’re correct), on over to the barrel containing 20 or so vintage saws. The handwritten sign said “$3.00 each or four for $9.00.”

I looked for old handles, ones that a touch of lamb’s to the low part of them. I looked for straight sawplates, and for handles with all their nuts. Three minutes was all it took to cherry pick the best of the bunch including a D-8 thumbhole-handled saw in excellent shape. I’ve been manifesting a thumby for a long time now.

Here are the five that met my standards:

Handsaw Honey Hole Inventory

Maker Model Length PPI Notes
Disston D-8, thumbhole 26″ 6, rip Finally, I own one!

Medallion dates to 1896-1917

Disston D-8 26″ 9, XC Medallion dates to 1896-1917
Disston No. 7 26 ½” 8, XC Nice, though worn, handle plus intact nib.

Medallion dates to 1878-1888

Disston D-8 26″ 10, XC Medallion dates to 1896-1917
Bishop & Co. ? 24″ 8, XC Nice panel saw, plate a bit pitted, and a medium kink toward the toe.

 

But that’s not all! If you order now…
There was more to see so I placed the five saws on a table near the seller. That’s my safeguard strategy lest some wiseguy show up on the scene to pilfer my loot.

Nearby, I spied an ancient miter box with no readily identifiable maker’s marks. Lying on top of it, and included in the $7.00 price was a rust-covered, Disston 16″ tenon saw.

Maker Model Length PPI Notes
Disston #4? Backsaw 16″ x 4″ under the spine ? Medallion dates to 1947-1955, nickel-plated hardware
Goodell Manufacturing Co. ?, miter box      

The seller had mistakenly thought that the backsaw went with it. That’s ok by me. You see, I’ve had my eye out for a tenon saw to file crosscut as a complement to my rip-filed Spear & Jackson tenon saw.

I lugged the bundle over to my table and paid the man the $20 he asked for even though his “four for $9.00 special” should have yielded a final price of $19.00 for the bunch. Sometimes a man just has to accept that there will be times in life when he gets taken. No sense brooding over it. Just chalk up the $1.00 drubbing to a lesson learned and move on.

As I was strolling to my car, I passed a guy pulling on handyman gloves to sort through the saw barrel. Had he been there even five minutes earlier, he would have beaten me to the picking punch. I smiled inwardly as I walked past him thinking, “Not this day my friend.”

Putting them back to work
So far, I’ve rehabbed the Distton 16” tenon saw. It has quite a heft to it. And I like the 4” under the spine to make deep joinery cuts when the occasion calls for it. And even though it probably dates to the 1950s, the steel is good too.

All that my D-8 thumbhole needs is a good sharpening. But first, I need a fine crosscut saw. So I’m rehabbing the Disston D-8 10 ppi. After that, I’ll rehab the Bishop panel saw. I love panel saws because I have shorter arms and the handles fit so neatly into my palm. Plus, they’re easy to wield on stock secured in my front vise.

After that, I may clean up the No. 7. Before I do that, I’ll want to get a feel for how rare/not rare No. 7s are that date to the 1880s. It’s not in great shape though it has a straight blade. So I’m thinking it doesn’t have much collector value. If that’s the case, it won’t hurt to rehab it and make it a user.

Ah. What a nice problem to have. Such is the joy a handsaw honey hole can bring to a man’s life.

###

About these ads

About The Write Biz

By day, I'm a mild-mannered copywriter who harnesses frontal-lobe creativity (right brain) to help B2B marketers generate leads and sales. By night I pick up hand tools to create wooden masterpieces...and give my black lab Bella the "red dot" laser to chase after.
This entry was posted in Rehab, Saws, vintage tools and tagged , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s